How To Calibrate Your Thermometer:
The thermometer is initially calibrated at the time of
manufacturing. If the thermometer is used according
to the manual, periodic readjustment is not required.
However, we recommend conducting a quick
calibration to confirm that your unit didn't get
damaged during shipment. A quick way to calibrate
your unit is by doing the water test. Dip the tip of the
thermometer into a cup of hot water. Wait for your
thermometer to show 'Hi' or a high temperature
reading number on its LCD display (for example it
shows 38 °C or 100 °F). Then let it sit for a minute or
two then dip it into a cup of cold water. Your display
should show 'Lo' (meaning low temperature not low
battery) or a low temperature reading number this
time (for example it shows 33 °C or 91°F). Leave it at
room temperature for 30 minutes and try using it
again, and if it does not show ‘Hi’ or ‘Lo’ it will mean
you have successfully checked your thermometer
and good to go! If you find that your reading is very
low and/or not changing on the LCD display at all,
please get in touch with us through email with your
Amazon Order ID.
o
F/
o
C SWITCHABLE
Temperature readings are available in the
Fahrenheit or Celsius scale (
o
F/
o
C; located in the
upper right corner of LCD). With the unit off, press
and hold On/Off Button for approximately 2 seconds
to change the current setting.
