20
ENEN
CLEANINg AND MAINtENANCE
•
After use, proceed with cleaning by removing all components, carrying out the assembly in-
struction above described in reverse order.
warning:
Should the pressing screw (D) be blocked and cannot be removed from the bowl (G), pull up the
pressing screw (D) and rotate gently by hand to take out.
•
Use a clean and soft cloth only for cleaning the motor base (N).
•
The detachable parts may be cleaned by using warm water and any dish detergent.
•
It is recommended indeed to clean the stainless steel filter (E) under running water using the
appropriate brush (M) supplied. Be careful not to damage it.
warning:
In order to make filter cleaning easier, after use, let it immersed in warm water with a little dish
detergent for 10 minutes.
•
While cleaning the bowl (G), the rubber stopper in orange can be opened for easier cleaning
(Fig. 9-10). Remember to fully insert it back into the pulp ejecting spout (P), otherwise you will
fail to assembling the bowl (G) to motor base (N).
warning:
Never put the appliance or any detachable parts of this appliance in the dishwasher.
warning:
After cleaning, let it completely dry before mounting.
9
10
