11
should rest in the two curved recesses in the lid (4) and it should no longer be possible to twist it.
It sinks down slightly when properly fitted.
Warning!
Make sure the power cable (3) is not in your working area. Otherwise, you could accidentally pull on it
and tip over the Mini Chopper or cause the motor unit (2) to fall off the glass bowl(7).
Switching on / selecting speed
The Mini Chopper can only be switched on once the motor unit (2) is properly locked into position
on the lid (4).
Warning!
Hold the motor unit (2) firmly in place with one hand and the glass bowl (7) with the other when using
the device to ensure the contents are not thrown out.
1.
Connect the power cable (3) to a live mains socket.
2. Slightly push down the motor unit (2) to switch on the appliance at normal speed and use your
thumb to press on the turbo button for turbo speed. See the recommendations.
Warning!
Note the KB times (short operating times) for the cutting blades (5) and the emulsifying disc (6). See the
technical specifications on cover page.
3. Release the turbo button to resume the normal speed. Gently release the motor unit (2) to stop the
chopper.
Risk of injury
The cutting blades (5) continue to turn immediately after being switched off. Wait for the cutting blades
(5) to come to a complete standstill before removing the motor unit (2), opening the lid (4) or taking
other steps.
Summary of Contents for 145233.01
Page 19: ...16 IT...
Page 37: ...16 EN...
