18
19
EN
DESCRIPTION OF THE APPLIANCE
Refer to the illustrative guide on page I to check that your appliance is complete with all accessories.
1.
Underblanket connector
2.
Control unit connector
3.
Mains socket
4.
Underblanket
5.
Label
6.
Control
This appliance is not intended for medical use in hospitals.
DO NOT use if wet.
DO NOT USE FOLDED OR CREASED.
DO NOT INSERT PINS OR NEEDLES.
See the external packaging for the characteristics of the ap-
pliance.
Use the appliance only with the supplied accessories that are an
essential part of the appliance.
P
er l’uso continuo dell’apparecchio fare riferimento al capitolo
UTILIZZO di questo manuale
Q
uando l’apparecchio non è usato, conservarlo come indicato al
capitolo CONSERVAZIONE di questo manuale
When storing the appliance, allow it to cool down before folding.
PREPARATION
POSITIONING THE UNDERBLANKET
WARNING! The electric blanket must only be placed
between the mattress and the flat sheet and not on top
of persons in bed.
Spread the underblanket (4) directly on the mattress, with the socket (1) side facing downwards.
Make sure the underblanket is always spread out smoothly.
Make the bed, laying the mattress cover and/or the first sheet on top of the underblanket. Place
the second sheet and the normal blanket or duvet on top.
USE
WARNING! DO NOT use this appliance if there are
visible signs of damage.
WARNING! DO NOT suitable for children under the
age of 3.
CONNECTING THE CONTROL UNIT
WARNING! This appliance is only to be used with the
control unit supplied with it.The reference of the control
unit is specified on the label sewn onto the appliance.
Insert the control unit connector (2) in the socket (1) to connect the control unit to the underblanket.
In the case of the double bed model, repeat the operation for the second plug as well.
SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE
WARNING! DO NOT place the control unit under the
pillow or under the sheets when in use.
Insert the plug of the control unit cable in the mains socket (3).
To pre-heat the bed, switch on the underblanket and set the temperature adjustment button at
position 2 (maximum temperature), then cover the bed with the sheet and normal blanket or
duvet.
NOTE: the time needed for the underblanket to warm up
will depend on the room temperature. The temperature of the
electric blanket must be evaluated by lying in the bed rather
than just feeling it by hand.
NIGHT-TIME OR CONTINUOUS USE
For continuous use, select the minimum temperature (set the temperature adjustment button at
position 1).
SWITCHING OFF AND DISCONNECTING
Set the temperature adjustment button at position 0 to switch off the underblanket.