32
EN
•
have read and understood the operating
manual, especially the Safety chapter.
Personal protective equipment
Wear protective headgear.
With it you protect your head from
splintering, falling and flying pieces
which could cause injuries.
Wear hearing protection.
Excessive noise can lead to hearing
loss.
Wear eye protection.
With it you protect your eyes from
splintering, falling and flying pieces
which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts
generated when processing workpieces.
Wear protective gloves.
They protect your hands from burns,
crushing injuries and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and
entanglement hazard posed by rotating
parts.
Wear safety boots.
They protect your feet from splintering,
falling and flying pieces which could
cause injuries.
Residual risks
Warning of electrical voltage
Electric
shock from insufficient insulation.
Check the device for damages and
proper functioning before each use.
If you notice damages, no longer use
the device.
Do not use the device when the device
or your hands are damp or wet!
Warning of electrical voltage
Work on the electrical components
must only be carried out by an
authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove
the mains plug from the mains socket
and the battery from the device!
Hold onto the mains plug while pulling
the power cable out of the mains
socket.
Warning of electrical voltage
There is a risk of a short-circuit due to
liquids penetrating the housing!
Do not immerse the device and the
accessories in water. Make sure that
no water or other liquids can enter the
housing.
Warning of explosive substances
Do not expose the battery to
temperatures above 45 °C! Do not let
the battery come into contact with
water or fire! Avoid direct sunlight and
moisture. There is a risk of explosion!
Warning of hot surface
The insertion tool might still be hot
after the application. Burn hazard when
touching the insertion tool.
Do not touch the insertion tool bare-
handed!
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced
during operation pose of risk to the
health of the operator and persons in
the vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing
asbestos.
Asbestos is considered carcinogenic.
Warning
Make sure not to hit power, gas or water
lines when working with a power tool.
If necessary, use a pipe detector to
