33
EN
check the wall you want to drill in or slit
open.
Warning
Risk of injuries caused by flying parts or
bursting tool heads.
Warning
Dangers can occur at the device
when it is used by untrained people in
an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not
belong in the hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around.
Children may use it as a dangerous toy.
Caution
Vibration emissions can cause a health
hazard if the device is used for an
extended period of time or if it is not
properly handled and maintained.
Caution
Keep a sufficient distance from heat
sources.
Notice
If you store or transport the device
improperly, the device may be damaged.
Note the information regarding
transport and storage of the device.
3. Information about the device
Device description
The device 149798.01 is suited for cutting
metal and stone materials without the use of
water as well as for cutting tiles and concrete
blocks.
The on/off switch is provided with a start
lock. The constant rated speed of 10,000/min
ensures constantly high performance even
under load.
The guard can be quickly adjusted without
tools. The spindle lock allows for a simple
exchange of discs.
The additional handle can be variably mounted
in 3 positions and, in combination with the
low level of vibrations, ensures comfortable
working.
The face spanner can be stored inside the
additional handle.
The battery comes with its own battery level
indication. As a result you can check the current
charging status without having to connect it to
the device.
Device depiction ( Fig.1)
No. Designation
1
Spindle lock
2
Thread (3 x) for additional handle
3
Device handle
4
Battery holder
5
On/off switch with start lock
6
Venting slots
7
Guard
8
Adjusting screw
9
coding pin
10 Locking lever
11 Face spanner
12 Battery
12a Battery level indication
13 Quick charger
14 Additional handle
15 Mounting flange
16 Clamping nut
17 Cutting disc
Scope of delivery
•
1 x Cordless angle grinder 149798.01
•
1 x Rechargeable battery
•
1 x Quick charger
•
1 x Cutting disc for metal, cutting disc
diameter: 115 mm
•
1 x Guard
•
1 x Additional handle
•
1 x Face spanner
•
1 x Clamping nut
•
1 x Transport case
•
1 x Manual
