34
EN
Technical data
Parameter
Value
Model
149798.01
Nominal voltage
20 V
Rated speed
10,000 /min
Spindle thread
M14
Maximum disc
diameter
115 mm
Weight
2.55 kg
Cutting disc (scope of delivery)
Idle speed cutting
disc
13,300 /min
Disc speed
80 m/s
Bore diameter
22.23 mm
Cutting disc thickness 3 mm
Battery
151219.01
Type
Li-ion
Nominal voltage
20 V
Capacity
4.0 Ah
Quick charger
151443.01
Input
Nominal voltage
230 – 240 V / 50 Hz
Power input
94 kW
Output
Nominal voltage
21.5 V
Charging current
3.5 A
Charging time
1.5 h
Cable length
1.5 m
Protection class
II/
Parameter
Value
Vibration information according to EN 60745
Vibration emission
value main handle ah
2.6 m/s²
Vibration emission
value additional
handle ah
1.7 m/s²
Uncertainty K main
handle / additional
handle
1.5 m/s²
Sound values according to EN 60745
Sound pressure level
L
pA
81 dB(A)
Sound power L
WA
92 dB(A)
Uncertainty K
3 dB
Wear hearing protection.
Excessive noise can lead to hearing
loss.
Information on vibration:
•
The declared vibration total value has
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
Caution
Vibration emissions can cause a health hazard
if the device is used for an extended period
of time or if it is not properly handled and
maintained.
•
The vibration emission during actual use of
the power tool can differ from the declared
total value depending on the ways in which
the tool is used. The vibration load may
be underestimated if the power tool is
used regularly in such a way. For a precise
estimation of the vibration load during a
certain work period, it is also important to
take account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time. This can reduce
the vibration load over the entire work
period significantly.
4. Transport and storage
Notice
If you store or transport the device improperly,
the device may be damaged. Note the
