35
EN
Setting the splinter blow-off/suction function
(Fig.21)
You can choose whether the splinters shall be
blown off towards the front or sucked off with
an optionally connectable vacuum cleaner.
1. Make sure that the protective cover (16) is
mounted.
2. Slide the blow-off/suction function selector
switch (4) to the left to suck the splinters in
using an external vacuum cleaner, or to the
right to blow the splinters away.
Connecting the dust extraction system
(Fig.22-23)
You can connect a vacuum cleaner to the
device. The adapter included in the scope
of delivery allows to connect smaller pipe
diameters.
Caution
Use a special vacuum cleaner to suck off
harmful or toxic materials.
1. If required, attach the adapter for dust
extraction (10) to the dust extraction
connection (3).
2. For an optimum dust extraction, insert the
anti-splinter guard if possible.
3. Connect a suitable vacuum cleaner (e.g.
industrial vacuum cleaner) to the dust
extraction.
4. Slide the splinter blow-off/suction selector
switch (4) to the left to the position for dust
extraction.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp
hands.
•
Hold onto the mains plug while pulling the
power cable of the charger out of the mains
socket.
•
If required, allow the device to cool down.
•
Remove the battery from the device (see
Start-up chapter).
•
Clean the device according to the
Maintenance chapter.
•
Store the device according to the Storage
chapter.
7. Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than
those specified in the operating manual may
cause a risk of injury.
Designation
Jigsaw blade set for wood, 10-piece
Jigsaw blade set for metal, 10-piece
Spare battery 2.0 Ah 20V
8. Errors and faults
The device has been checked for proper
functioning several times during production.
If malfunctions occur nonetheless, check the
device according to the following list.
Troubleshooting tasks which require the
housing to be opened must only be carried out
by an authorized specialist electrical company
or by EUROSPIN.
Slight smoke or odour are emitted during first
use:
•
This is not a fault. These phenomena
disappear after a brief runtime.
The battery does not charge:
•
Check whether the battery is correctly
connected to the quick charger.
Slide the battery into the quick charger in
a way that the battery terminals engage in
the quick charger. The battery must lock in
place in the quick charger.
•
Check the power connection.
•
Check the power cable and mains plug for
damages.
•
Check the fuse (home).
