RECON/4a
ENMET
Manual Revision Date – June 15, 2017
P a g e
|
9
Manual Part No. – 80006-004a
•
After calibration, the screen will display the calibrated gas(es) name(s) and relative data.
RECON/4a
will automatically turn off.
Example:
NOTE:
The RECON/4a automatically determines if a single or multi gas is applied. You will only see calibration numbers for the
gas/gases that are being applied; the remaining sensors are not affected.
•
If you are calibrating individual sensors repeat the above process.
•
If the calibration was unsuccessful wait one hour and repeat the calibration procedure.
Figure 3: Calibration of RECON/4a
4
.1 Calibration Equipment
ENMET
part numbers
Description of Part
Part Number
Sensor Cover Assembly RECON/4a
02615-025
Regulator Assembly for 34 liters, aluminum cylinders
02506-002
Use with the following:
Gas Cylinder, aluminum 40ppm H2S, 34 liters
03314-040
Gas Cylinder, Mixed Gas, aluminum 34 liter 500ppm CO, 40ppm H2S, 50%LEL CH4, 20.9%O2,
balance N2
03388-001
Regulator Assembly for 34-liter steel cylinders
02506-004
Use with the following:
Gas Cylinder, steel 50%LEL Methane, 34liter
03220-050
Gas Cylinder, steel 20.9% O2, 34 liters
03296-209
Gas Cylinder, steel 500ppm CO, 34 liters
03219-500
Calibration Cover
Regulator
Gas Cylinder
