Code: I.H4.V10.3003
Installation and Maintenance Manual
Version: 07
12 / 66
Ennera Energy and Mobility, S.L.
This document contains confidential information which is property of Ennera Energy and Mobility, S.L. The copy, transmission or use by other people, of the whole document or
part of its contents, is not allowed without written permission from Ennera Energy and Mobility S.L.
14.
In case the top surface finishing of
the foundation is good (flat and
smooth), the foundation is finished.
15.
In case the finishing of the top
surface is not good, a final layer must be
added.
16.
When the concrete is cured, remove
the fixing bolts template. Make a
rectangle of wood and pour a 25mm
layer with non shrink grout according to
the drawing.
The bolt must have 160mm
out of the non shrink grout.
17.
Take away, with the help of a
hammer, the 4 pieces of wood located
around the foundation and cover the
concrete area with the soil removed
from the hole.
160mm