11
The stored readings can be reviewed by pressing the Left or
Right buttons. The number in the lower right corner
indicates the memory location.
To delete a reading, long-press the RIGHT button. The
display will then change to the previous stored reading.
Note that no readings are stored when in surface
temperature measurement mode.
Backlight
Press and hold the backlight button to toggle the backlight
on and off. In body temperature measurement mode, the
backlight will change colors depending on the measured
temperature (see section “How to Take a Body Temperature
Reading”). In surface temperature measurement mode, the
backlight will always remain green.
Auto Shut Off
After approximately 7 seconds of non-use the thermometer
will automatically turn off.
Maintenance
Do not expose the thermometer to sunlight or water.
Lens Care and Cleaning
The infrared sensor is the most sensitive and fragile part of
the thermometer, please treat it with care. The lens cover
