ENGLISH
Dear customer,
Plancha is a grill by contact ideal for a healthy cooking of any type of food: shellfish, fish, meat, vegetable... It has been
used for a few years by the most famous ‘’chefs’’, and is now available in three sizes 60 cm, to go along with your
relaxing moments with family and friends.
The ENO planchas are designed and manufactured in France. They are “Certified French Origin” guaranteed.
ENO is designing sustainable, recyclable quality products.
In order to fulfill your expectations, we have designed this item to be operated on all available gas cylinders or from a
connection to natural gas.
The heat output of your Plancha is such that the support of your product must be made of an inflammable material:
concrete, fire-proof bricks or ceramics. For your comfort, we have designed a specific and elegant range of trolleys.
Please ask your retailer for more details on these.
We ensure a two year guarantee for parts and labour, starting from the purchasing date. Cast-iron hotplates and
burners have a 10-year warranty from purchase date. Our service department commits to ensure availability of parts
during 5 years minimum after your purchase. However, we recommend to strictly follow our technical instructions for
use and maintenance. Not respecting these instructions may be dangerous or might generate serious damages on your
product.
For your safety, we remind you that Plancha is for outdoor use and that no flammable material must be in a radius of
ca 0,50 m around and beneath the product. We also recommend not to store any flammable liquid or vapors next to
the product.
In case you notice a gas smell, you have to shut the valve of gas cylinder or the connection to natural gas. When not
using the Plancha, shut as well the valve of gas cylinder or connection to natural gas.
We thank you for the confidence in buying an ENO product, which has been designed to give you the best satisfaction
every time you use it.
Destination countries
Pressure (mbar)
Category
BE - CH - CZ - ES
– FR - GB - GR - IE - IS - IT - LU - PT
G30/G31 (28 - 30/37 mbar)
I3+
AT - BG
– CZ – DE - DK - FI - GR - NL - NO - RO – SE – SK - SI
G30/G31 (30 mbar)
I3 B/P
AT - CH
– DE - LU
G30/G31 (50 mbar)
I3 B/P
BE - FR
G20/G25 (20/25 mbar)
G30/G31 (28-30/37 mbar)
II2E+3+
I.
LEGAL CONDITIONS
YOUR PRODUCT CAN ONLY BE INSTALLED OUTDOOR
PLANCHA is not equipped with an exhaust system for burnt material.
It must installed and connected according to current legal installation rules.
A special attention will be paid to rules about air ventilation. An input of 15 m3 / h of fresh air is required for the feeding in
combustion air.
CAREFUL :
- Accessible parts can be very warm, keep young children away.
- This appliance must be kept away from flammable materials during use.
- It may be dangerous to modify any part of the product
- Do not move the product
- After use, shut gas valve on cylinder or wall (Natural gas)
- Wait until it is cold before cleaning
- Do not use adjustable regulator
- Do not modify the appliance
- We advise to use 6 or 13 kg cylinders (Butane or Propane) along with a safe regulator. This
item can also operate with natural gas (Ask advise from your retailer)
- The bowl must be handled when the product is cold
- The length of flexible hose between product and gas tank must not exceed 1,50 m.
II. CHOOSING GAS :
Your PLANCHA is adjusted in factory for butane / propane 28 / 37 mbar use according to information a data badge. In case of
use of natural gas, ask advise from your retailer or contact our after sales service to receive the right nozzles.
CAREFUL: In case of use of natural gas, it is strictly forbidden to put your PLANCHA on a mobile table or a trolley. Your
product must be fixed.
III. GAS CONNECTION
Two keys are necessary one for the side of gas inlet, the other on the side to screw
To ensure a proper setting up, avoid to twist or curve the rubber tube.
Changing containers must never be undertaken in the presence of a naked flame.
Connection for use in category I3+ (Butane / Propane)
The product must be connected on the side, close to the knob
For butane (G30), use a safety regulator NF 28 mbar
- Flexible metal hose NFD 36 -125 (Length 1 m)
- Flexible hose XPD 36 - 112 (Length 1 m)
For propane (G 31), use a safety regulator NF 37 mbar
- Flexible metal hose NFD 36 - 125 (Length 1 m)
-
Flexible hose XPD 36 - 112 (Length 1 m)
The tightness must be checked with soapy water after opening the cylinder. No bubble shows
a good tightness.
DANGER: Never check tightness with a flame.
Connection for use in category I2E + (Natural gas).
You can receive an advise from your retailer or from our after sales service
For natural gas (G 20)
- Flexible metal hose NFD 36 - 121
- Flexible hose NFD 36 - 103
The hose must be corresponding to standards and visible on its whole length (From the wall valve to product), it must be as
well easy to reach.
The tightness must be checked with soapy water after opening of the wall valve. No bubble shows a good tightness.
DANGER : Never check tightness with a flame. it is strictly forbidden to use a connector for butane gas.
IV.
BEFORE USE
- Check tightness
, if you notice a leakage, shut gas inlet
- Check that hose cannot be in contact with parts of the product that can become warm
- If you have equipped your product with a lid against dust or humidity, check that this one is removed
- Before the first use, operate empty PLANCHA during 15 minutes (A light smell can be noticed for a while)
- The bowl to receive juices must be handled when cold
- Before any cooking preheat during 10 minutes (Knobs on bigger flame)
8
7
