Seite
2
von
6
1.
Introduction
Please read this Quick Start Guide carefully before using the Gateway. For more information about the
gateway, the software, and the latest documents, visit the website: www.enocean-gateway.eu.
1.1.
Symbols
WARNING! Important information on hazards and risks!
NOTE! This section contains further important information!
1.2.
Notes
Avoid placing the device in a metal housing. Such placement will affect the ability to communicate with other
devices. If the device must be placed in a closed metal enclosure, make sure that the antenna is placed outside
the cabinet.
Do not open the device! In the event of an error, please contact the manufacturer.
1.3.
Health risks
Use the device only for the intended purpose. The device is only suitable for indoor use. Avoid
exposing the device to moisture, dirt or dust. Avoid direct sunlight and other sources of heat.
FFAQs and downloads can be found at: www.enocean-gateway.eu
In case of technical problems please contact our support:
2.
Functionality
The primary function of this product is to act as a communication bridge between EnOcean Wireless World and
IP networks. EnOcean-certified sensors and actuators connected to the gateway can be controlled and
retrieved via various interface commands. The EnOcean components are registered and administered via the
device's web interface. System configuration is also possible with limited knowledge of EnOcean devices.
3.
Scope of delivery
A
1x Gateway
B
1x Antenna
C
1x Power Supply (110-230V Euro Adapter in, 5V 2A USB out)
D
1x Bracket Mount
,
4x Rubber foot, 4x srews (for wall mounting)
E
LAN Cable, 1m, RJ45-Stecker
