USER MANUAL V1.12
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Phone +49.89.67 34 689-0
Fax +49.89.67
34
689-50
info@enocean.com
www.enocean.com
Subject to modifications
PTM 230 User Manual V1.12
June 4, 2008 2:02 PM
Page 2/12
PTM 230
REVISION HISTORY
The following major modifications and improvements have been made to the first version of
this document:
No
Major Changes
0.91
Requirements for energy converter added in 2.1
0.92
Section 3.1 Antenna Mounting added
0.93
Drawing for contact pads added
0.95
Specification for energy generator modified, tolerance in PCB dimensions modified
0.96
Minimal switching interval defined in 1.2 and 1.1; change in 2.3.2 maximum 3
sub-telegrams are transmitted; hole diameter changed to 2mm in 1.3; antenna
end should be insulated in 3.1
1.0
Mechanical drawing updated; additional pads for rocker information described;
telegram content specified; minimal switching time changed to 50ms.
1.01
Humidity range reduced to 93% max.
1.02
Minor changes
1.03
Editorial changes
1.1
Energy pulse shape modified
1.11
Declaration of conformity added
1.12
Requirements for energy pulse modified
Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany
www.enocean.com, info@enocean.com, phone ++49 (89) 6734 6890
© EnOcean GmbH
All Rights Reserved
Important!
This information describes the type of component and shall not be considered as assured
characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry
and specifications are subject to change without notice. For the latest product specifica-
tions, refer to the EnOcean website: http://www.enocean.com.
As far as patents or other rights of third parties are concerned, liability is only assumed for
modules, not for the described applications, processes and circuits.
EnOcean does not assume responsibility for use of modules described and limits its liability
to the replacement of modules determined to be defective due to workmanship. Devices or
systems containing RF components must meet the essential requirements of the local legal
authorities.
The modules must not be used in any relation with equipment that supports, directly or
indirectly, human health or life or with applications that can result in danger for people,
animals or real value.
Components of the modules are considered and should be disposed of as hazardous waste.
Local government regulations are to be observed.
Packing: Please use the recycling operators known to you. By agreement we will take pack-
ing material back if it is sorted. You must bear the costs of transport. For packing material
that is returned to us unsorted or that we are not obliged to accept, we shall have to in-
voice you for any costs incurred.
