33
EN
2.4
Installation
2.4.1
Moving
Once the appliance has been removed from its packing, proceed as follows to move it into position:
–
Move the appliance near the place of installation
–
only for models MIAMI MEDIUM, MIAMI MINI e MIAMI B&R:
Pull out the drip tray (1) from the rear of the appliance, taking care
not to damage the cable (2)
–
Steer the forks (3) of a pallet transporter under the appliance, lift it just clear of the floor and remove the pallet (4)
–
Lower the appliance back on to the floor and replace the drip tray (1), taking care guide the cable (2) back into its original po-
sition.
a
WARNING!
While moving the appliance, take great care to prevent it falling over.
1
2
3
4
1
2
Fig. 8
2.4.2
Fitting the handle
–
Open the front door
–
Position the handle (10) over the holes in the outside of the door
–
Gently move away the seal (11) on the inside of the door to locate the holes. Fix the handle in place using the plastic spacers
(12) and screws (13)
–
Return the seal (11) to its original position, taking care not to distort it
–
Close the door then open and re-close the door to check that the handle is correctly secured.
10
11
13
12
13
13
13
12
12
12
10
Fig. 9
Summary of Contents for MIAMI
