eno
one 2/r - user manual
REV.05
13
12. POSITIONING
The first group of images (1) shows the minimum spaces required to
ensure correct ventilation and access to the Dispenser.
In the event of recessing (2), it is necessary to create a structure with an aeration
duct for the circulation of air with a section of at least 100cm
2
(15.5in
2
), directed as in
one of the three examples shown (2.1, 2.2, 2.3).
In this case it is advisable to always consult the retailer before designing the struc-
ture to encase the dispenser.
Place the Dispenser on stable and non tilted surfaces.
To facilitate changing, always position the cylinder in accessible places. In the
case of recessing, it cannot be accommodated in the space rear with strap
(
E
)
of the Dispenser but must be placed in a more accessible place (for example
within the cabinet).
Only place the Dispenser
in indoor dry environments and with a maximum tem-
perature of 26°C (79°F), with humidity no greater than 60% and away from heat
sources.
MODULARITY
Eno
one
is a modular dispenser that can
be flanked, using a suitable side mounting
system, to another Dispenser of the same
model, that can also be connected to a single
source of gas.
For more information, contact the
retailer.
≥ 20 mm
≥ 0.79 in
≥ 10 mm
≥ 0.39 in
≥ 10 mm
≥ 0.39 in
≥ 20 mm
≥ 0.79 in
≥ 900 - 1000 mm
≥ 35.43 - 39.37 in
≥ 20 mm
≥ 0.79 in
≥ 40 mm
≥ 1.57 in
INSTALLATION
1
2
2.1
2.2
2.3
