eno
one 2/r - user manual
REV.05
27
USE AND OPERATION
Place the glass under the dis-
pensing nozzle (
S
) tilting it slightly.
Press the dispensing button only
once. In the case of programmed
dose "PO", instead hold down the
button for free dose "FE" (para.
25)
Do not dispense before having
positioned the glass under the
respective nozzle.
Wait a few seconds with the glass
under the dispenser after the end
of dosing.
The Dispenser does not have
devices that detect when there is
no longer any wine in the bottle.
As such, pay attention to the last
dispensing in the event that the
amount of residual wine is below
the dose chosen.
Finishing of
the liquid during dispensing
involves a significant escape of
gas
that is easily recognisable
by an irregular and loud flow
(intermittent spraying).
It is
therefore necessary to follow
these instructions:
• In the case of free dose
immediately,
release the dose
button
(
V
).
• In case of programmed dose
,
immediately press the dose
button
(
V
).
The Dispenser has
2 dispensing units
that preserve the wine in the bottles that
have been introduced and to remove it by means of the rubber straws, dispensing
it into the glass. It is possible to dispense immediately after having introduced the
bottles (para. 20) by simply pressing one of the dose dispenser buttons (
V
).
The dispenser enables simultaneous dosing from the two dispensing noz-
zles
(
S
).
24. DISPENSING
