Enovap EN1, Instruction Manual

20

21

Coils too different

This message appears if you used two 

different types of pods. To resolve this 

problem, please use 2 pods with simi-

lar resistances (e.g. 2 pods in 0.6 ohm).

Left / right pod not detected

This message appears if there is no 

connection with one or both pods. To 

resolve this problem, check that the 

upper and lower parts of your device 

are properly connected and that both 

pods are inserted correctly in the up-

per part.

Updating

This  message  appears  when  the  fir

-

mware is being updated by Bluetooth. 

Please  do  not  turn  off  or  disconnect 

the Bluetooth connection until the up

-

date is complete.

Temperature is too high

This message appears if the tempe-

rature inside the product is too high. 

Please wait for the temperature to go 

down before using your Enovap again.

Bluetooth 

A Bluetooth icon appears when the 

time is no longer up-to-date. Updating 

the  time  is  necessary  if  you  use  the 

automatic  mode  or  if  you  track  your 

data.  The  time  is  automatically  reset 

by connecting your device to the mo

-

bile application.

Reboot

In  the  event  of  a  software  pro

-

blem, press and hold the 

 and 

  button  at  the  same  time  for

10 seconds to reboot your Enovap.