Software Release: [App: 02.09.10039.00; Config: 2.9.20024; Built in PowerVision Configuration Studio Version:
2.9.23042; BTL: 02.09.10015.00]
Section 40
22
00-02-0996
2019-06-13
The first six-up screen (shown above) displays Oil Temperature, Fuel Level, % Load, Fuel Rate, Suction and
Discharge to the operator. If alternate parameters are desired, these may be changed within the free MPC-
20-R2 Software Configuration tool.
The second six-up screen (shown above) displays to the operator System Level, Pump Oil (temperature),
Pump Housing (temperature), Gear Box Pressure, Ambient (temperature) and Flow Rate. If alternate
parameters are desired, these may be changed within the free MPC-20-R2 Software Configuration tool.
The screen above displays the auto start/stop type and illustrates the throttling method for the auto start/stop.
This screen is a default setting which displays dual contact start (floats) and auto throttle to a Running Loaded
Speed. The percent shown below the bar is the percent between the minimum and maximum speed set in the
controller under Engine Settings.