23
Copyright Enphase Energy Inc. 2010
141-00010 Rev 01
The Environ Configuration and Programs screen lets you control your temperature
and mode using the same controls as the Environ Summary; see your current
programmed settings; see the status of your changes; and set, view, and edit
programs.
Changes made on the Environ thermostat and through Enlighten are synchronized
approximately every five minutes through the Enphase Envoy communications
gateway and the Enlighten portal.
Environ Configuration
Status of last update
The Environ Configuration screen displays the status of your last update. The
possible statuses are:
x
Pending: The operation has not yet been sent through the Envoy to the
thermostat.
x
Complete: The operation succeeded.
x
Unsuccessful: The operation failed.
You can click on “Last 10 Updates” to see the status of the last 10 messages for the
thermostat that were sent to the Envoy.
Manage Programs
In the
Manage Programs
section you can customize daily or weekly programs to
automate temperature settings for your thermostat. The screen includes the
following elements and functions:
x
Program:
This lets you select a different program to view or modify. In
addition to the current thermostat program, there are three default programs
that you can customize and apply to your Environ thermostat: Normal, Work
at Home, and Vacation.
x
Calendar:
Each day of the week is displayed along with the programmed
time slots for that day. Each time slot represents your comfort range for that
time. For instance, the screenshot above shows that the homeowner’s
current program has been created to suit the following schedule:
Weekdays:
