33
Copyright Enphase Energy Inc. 2010
141-00010 Rev 01
dehumidify and the thermostat is also calling for COOL
<HTS+TST> (HST=humidistat, TST=thermostat).
EXTERNAL DE-HUMID
: The Environ humidistat can also control an
external dehumidifier, if you have a dehumidifier unit installed in your
HVAC system. Connect it to the DH terminal.
To set a maximum humidity level:
1.
Press
MENU
, then press the HUMIDITY.
2.
Press
MAX --%
and use the
+
/
-
buttons to set the desired
maximum humidity level.
3.
Press
HOME
to return to the Home screen.
Consumables
Consumables are the parts of
your HVAC system that must periodically be
replaced, such as filters and UV bulbs. The
Environ keeps monitors system run times, and
can be programmed to remind you when
consumables, such as air filters, humidifier
pads and UV bulbs, should be checked and/or
changed.
x
HUM PAD:
Run time of humidifier
x
AIR FILTER:
Run time of HEAT+COOL
x
UV BULB:
Real time
To set/adjust CHECK CONSUMABLES ALERTS
:
1.
Press Menu and press
CONSUMABLES
, and select a
CHECK
ALERT
to set.
2.
Select the number of weeks in the
CHECK ALERT
column for that
item, and use the
+
/
-
buttons to raise or lower the setting.
-
Alerts may be scheduled from 0 to 99 weeks.
3.
Repeat for each item included in your system.
-
If your system does not include a listed item, leave the
CHECK ALERT
at 00wks.
4.
Press
HOME
to return to the Home screen.
When the Run Time for a given item reaches the limit you have set, the
Environ will show you a reminder in the message area of the Home
screen.
