- 14 -
4 Trouble Shooting
No.
Problems
Solutions
1
Mains over-voltage or
under-voltage
Check whether the input voltage is too high or too low. If this problem
still exists excluding the input abnormality, have a check whether the
parameter setting on the display interface is correct.
2
Output over-voltage
Check whether the output voltage is within parameters setting range. If
not, please check whether the output voltage/current is too high, or the
parameters setting is reasonable.
3
Grounding fault
Check whether the grounding connection cables are connected
correctly.
4
Emergency stop
Check whether the emergency stop has been pressed, then correct the
error and recover the emergency stop button.
Note: if the above problems cannot be solved, please contact the manufacturer.
5 Disposal
The packaging materials are environmentally friendly and can be recycled. Put the packaging in applicable
containers to recycle it. Do not dispose this product with the household waste. It shall be handed over to the
applicable collection point for the recycling of electrical and electronic product. For more detailed
information about recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
