Page 15 of 30
EN109-1413760-47 IFU
HEART RATE
Choose heartrate training when you like to relate
the intensity of the training to the heart rate of the
patient. The power that needs to be delivered by
the patient will automatically be adjusted
depending on the targeted heart rate.
Note
: For this mode of training the patient needs
to wear a chest belt and some basic knowledge of
heart rate training is required to set the right target
heart rate for your patient.
When the “arc” is displayed over the Target hear
rate, this can be set by turning the rotary knob.
Select the max heart rate to set this value in the
same way.
HILL PROFILES
This menu includes 12 set training programs.
Profiles 1-6 are displayed. Use the rotary knob to go
to page 2 (profile 7-12). The power you need to set,
is the maximum power for this program. Depending
on the profile, the power will vary between 50% and
100% of this value. Apart from the profile and its
maximum power, you can also set the total time for
the training.
During the hill training, the actual power will be
displayed. Please note that when you increase the
power for the actual stage of the training, the
power for the other stages in the training will
increase too.
A countdown timer is displayed below the power to
indicate when the next stage will start.