Page 25 of 26
EN109-1412791-48 IFU
Recommended separation distances between portable and mobile RF communications equipment and the EN-
Dynamic
The EN-Dynamic is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the EN-Dynamic can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the EN-Dynamic as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power
of transmitter
[ W ]
Separation distance according to frequency of transmitter [ m ]
150 kHz to 80 MHz
d
= [3.5/
V
1
]√
P
80 MHz to 800 MHz
d
= [3.5/E
1
]√
P
800 MHz to 2.5 GHz
d
= [7/E
1
]√
P
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1
1.17
1.17
2.33
10
3.69
3.69
7.38
100
11.67
11.67
23.33
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters (m)
can be estimated using the equation applicable to the frequency of the transmitter, where
P
is the maximum output power
rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people
12
Contact
For assistance, please visit our website
The latest version (in electronic or printed format) of this Instructions for Use can be obtained free of
charge from our website
or by contacting distributor or by calling the
telephone number: +31-(0)10-2030600. The Instructions for Use will be sent (free of charge) to you
within 7 (seven) calendar days.
13
Product liability
A law on Product Liability has become effective in many countries. This Product Liability law implies,
amongst other things, that once a period of 10 years has elapsed after a product has been brought
into circulation, the manufacturer can no longer be held responsible for possible shortcomings of the
product.
To the maximum extent permitted by applicable law, in no event will Enraf-Nonius or its suppliers or
resellers be liable for any indirect, special, incidental or consequential damages arising from the use of
or inability to use the product, including, without limitation, damages for loss of goodwill, work and
productivity, computer failure or malfunction, or any and all other commercial damages or losses,
even if advised of the possibility thereof, and regardless of the legal or equitable theory (contract, tort
or otherwise) upon which the claim is based. In any case, Enraf-Nonius entire liability under any
provision of this agreement shall not exceed in the aggregate the sum of the fees paid for this
product and fees for support of the product received by Enraf-Nonius under a separate support
agreement (if any), with the exception of death or personal injury caused by the negligence of Enraf-
Nonius to the extent applicable law prohibits the limitation of damages in such cases.
The opposing party (product’s user or its representative) shall disclaim Enraf
-Nonius from all claims
arising from third parties, whatever nature or whatever relationship to the opposing party.
Summary of Contents for EN-DYNAMIC 1455951
Page 2: ......
