page 23
4.
Start Settings Update
- To manually initiate a Clone Setting update, press the Right arrow button on the
remote from this menu line. By selecting this item, the tuner will immediately begin the process of downloading
and storing settings stored on the Enseo Galileo System Server.
5.
Restore Factory Settings
- This function allows the tuner to be reset to the factory settings. Changes, channel
lineup programming and other setup customizations will be lost and the tuner will return to factory settings.
6.
Show Status
- This menu item will activate a status window showing important information about the display,
tuner, firmware versions and other diagnostic data.
User Menu
User menus are accessed using either the lodging remote
provided in the hotel room, or the remote supplied with the
display. These menus are available to users to enjoy the fea-
tures of the tuner and display. Only a few control functions
are available through the user menus.
1.
Captioning
- This feature allows the selection of OFF
/ ON and On When Muted, Using the arrow buttons
highlight the desired setting and then press the Left
Arrow button to save and exit the field.
2.
Digital Captioning Mode
- This allows the user to
select the format of the CC signal for digital channels
3.
Analog Captioning Mode
- This allows the user to
select the format of the CC signal for analog channels
4.
Sleep Timer
- The sleep timer function allows the
user to set the TV to turn off automatically after a
selected number of minutes.
5.
SAP
(Secondary Audio Programming) - This menu
item allows the user the option of turning on SAP
audio if available.
6.
Source
- If made user-accessible from the Setup
Menu, the user will have the ability to select available
inputs on the display for use of attached media de-
vices. If this feature is not enabled on the Setup menu,
this item will not be visible on the User Menu.
Note: The available inputs will be based on the model
of display and video expansion boards installed (if any).
Image 25 – Picture Format
7.
Picture Format
- If made user-accessible from the Setup
Menu, the user will have the ability to adjust the aspect
ratio of content presented on the display. If this feature is
not enabled on the Setup menu, this item will not be vis-
ible on the User Menu.
Note: On Plasma monitors, user access to Picture Format
will be limited to prevent the potential for image retention.
8.
V-Chip Options
- If made user-accessible from the Setup
Menu, the user will have the ability to set and control V-
Chip settings to restrict content from being shown on the
tuner. If this feature is not enabled on the Setup menu, this
item will not be visible on the User Menu.
Operation
The HD tuner is an advanced HDTV and NTSC TV tuner with features that support lodging systems and stand-alone
operation.
Lodging Mode:
The tuner will automatically function in a lodging mode when attached to a compatible PPV system. The tuner will
communicate with lodging system, identify the system and the necessary communication protocols and immediately
send commands to the display necessary to function with the attached PPV system.
Stand Alone Mode:
To control the tuner in stand-alone mode, the tuner must not be connected to PPV system. If the display is connected
to a PPV system, first disconnect the RJ12 communication cable between the tuner and the PPV control box. (RJ12 is
connected to CONTROL - PPV).
In Stand Alone mode, the tuner will respond to the Enseo remote and other compatible PPV system remotes. To access
the User Menu in stand alone mode, press the MENU button on the remote.
Image 25 - Picture Format
Summary of Contents for Hd2000 RF
Page 1: ...page 1 ...
