TBE-160CM Instruction Manual
Oct 2013 (USA)
16
S6 MAINTENANCE
MAINTENANCE
• When not in use, ensure the On/Off switch is OFF. The
green power light on the front panel and the On/Off
switch should not be illuminated.
• Rinse brush or marking head and felt with water to
remove excess cleaning fluid.
• At completion of a work shift, unscrew brush from
wand.
• After using the TIG Brush for cleaning, remove the brush
from the insulating shroud and rinse brush, shroud and
end of wand with water to remove cleaning fluid.
• After using the TIG Brush for marking, remove the felt
and marking head from the marking head adapter and
rinse with water to remove marking fluid.
• Allow parts to dry before re-assembling.
• Before assembling the brush or marking head adapter
to the wand, coat threads with copper filled anti-seize
compound. This will exclude the acidic solution from the
joints and prevent corrosion.
• Rinse clamp with water to remove solution and
prevent corrosion.
• Use a wet cloth to wipe fluid splashes off the TIG Brush
control unit. After some time splashes and marks may
accumulate and become difficult to remove.
Rinse brush
components
after use
Wand
Brush
Anti-seize compound
6.1
