16
Installation instruction
for flat collectors on flat roof or foundation.
adjacent buildings, trees, etc.
In case of a larger number of collector fields it is important for the front row not to shadow the
one in the back.
3.6 The warranty conditions of installation and use of collectors can be found in the
warranty card of a particular collector.
3.7 Application of collectors in coastal areas.
For collectors that are installed up to 500LM from the coastline – lack of warranty for an
absorber with a high-selective coat.
It is recommended to apply collectors with an absorber with an increased resistance to
seawater e.g. Mirosol TS.
4. Supporting construction installation
4.1 Inclination angle of the collectors
4.1.1 Roof or flat surface
In case of collector installation on a roof or a flat surface, the inclination angle of an
installing system corresponds directly to the assumed inclination of collectors.
4.1.2 Roof or surface of inclination angle up to 20°
In case of roofs inclined in the
southern direction „A” the roof
inclination should be deducted from
the assumed collector inclination. In
case of roofs inclined in the northern
direction „B”, the roof inclination
should be added to the assumed
collector inclination.
The obtained value indicates the
inclination angle of the set.
4.2 Setting the inclination angle
4.2.1 Setting the inclination angle of an installation set for a horizontal collector
