2
GATEKEEPER GPU OZONE GAS PURIFIERS
Installation and Operation Manual | Entegris, Inc.
OVERVIEW
—
These instructions provide clear guidelines on
proper operation and maintenance of GateKeeper
®
GPU Ozone Purifiers. Read this manual carefully as
there are important safety and product performance
topics that are discussed. Failure to follow these
instructions may result in damage to the product
or an unsafe condition.
SAFETY
—
Read Carefully
NOTE: Completely read this manual before
installation and operation.
DANGER! High-pressure fluids are dangerous.
Any accidental release of pressure can propel
objects at high speed and may cause damage
to equipment or injure personnel. Ensure that
proper safety precautions are taken in order to
prevent and/or mitigate hazardous conditions.
Ensure the area is well-ventilated to prevent
asphyxiation.
DANGER! USE THIS PURIFIER WITH APPROVED
GASES ONLY. If this product is exposed to
an incompatible gas, an exothermic or other
adverse reaction may occur. It is the user’s
responsibility to install all safety equipment
to prevent and mitigate the effects of such
a condition.
WARNING! Always pressurize and depressurize
a purifier slowly in order to prevent damage
to the filter membrane.
CAUTION! Never use purifiers with multiple
process gases. If this is required, contact
Entegris to ensure safe operation.
CAUTION! DO NOT exceed the maximum
flow rate for the purifier. See the
Mechanical
Specifications section (page 6).
CAUTION! DO NOT exceed the maximum
or minimum operating temperatures. See
the Mechanical Specifications table in the
Mechanical Specifications section (page 6).
CAUTION! DO NOT leave the purifier uncapped
for more than 60 seconds.