2
OPTIMIZER ST2 FILTER MANIFOLD
Installation and Use Manual | Entegris, Inc.
INTRODUCTION
—
The Optimizer
®
ST2 filter manifold is designed for
use with Optimizer point-of-use (POU) liquid filters
to minimize contamination risk when handling filter
cartridges. Using Entegris’ Connectology
®
technology,
the Optimizer filter quickly connects and seals to the
ST2 manifold, which enables rapid filter change-outs
without tools or draining. By limiting hazardous
chemical handling during installation, the filter mani-
fold speeds up installation and reduces downtime
while also increasing operator safety.
CAUTION: To reduce the safety risk of chemical
leakage, carefully follow these instructions.
SPECIFICATIONS
—
Materials
Metal plates
Stainless steel
Release tub
Polyacetal
Connectors
PFA
O-rings on
manifold
OM: Kalrez
®
Connections
Tube, Flowell
®
60, Flowell 80EZ
(See part number table for sizes.)
Maximum
operating
conditions
Maximum operating pressure:
0.39 MPa (3.9 bar, 57psi) at 25°C (77°F)
Maximum operating temperature:
40°C (104°F)
ORDERING INFORMATION
—
OPTIMIZER ST2 MANIFOLD
Quantity: 1 each/box
Tube Type (standard size)
Part number
Inlet/outlet
Vent port
AMVT442K1
12.7 mm (1/2") tube
6.35 mm (1/4")
AMVT332K1
9.53 mm (3/8") tube
6.35 mm (1/4")
AMVT222K1
6.35 mm (1/4") tube
6.35 mm (1/4")
Flowell 60 Elbow Type
AMVXL42KT
12.7 mm (1/2")
6.35 mm (1/4")
AMVXL32KT
9.53 mm (3/8")
6.35 mm (1/4")
AMVXL22KT
6.35 mm (1/4")
6.35 mm (1/4")
Flowell 80EZ Elbow Type
AMVZL42KT
12.7 mm (1/2")
6.35 mm (1/4")
AMVZL32KT
9.53 mm (3/8")
6.35 mm (1/4")
AMVZL22KT
6.35 mm (1/4")
6.35 mm (1/4")
Replacement O-ring
Part number
Description
10456J
Kalrez O-ring for ST2 manifold
OM version, 10/bag
CAUTION: If higher pipeline tension is expected, it is
recommended to use a double O-ring combination
of the OM manifold and OF filter.
