202
dataPAC User’s Guide
Chapter 5 - Balancing Measurements
1.
In the Program Manager, use the arrow keys to highlight the Remote Transfer icon,
then press <SELECT>. The following screen appears.
2.
Use the arrow keys to move the box up to the setting you want to change, then press
<SELECT>. Each setting is explained in detail in the next section.
Remote transfer settings
This section discusses each setting available in the Remote Transfer program, as well as
typical settings.
Modem Initialization
The Modem Initialization field contains a string of commands is sent to the modem before
making any connection through a modem. This string is made up of commands from the
Hayes modem command set. The default modem initialization string should work fine for
most Hayes-compatible modems.
Call Wait Disable
The Call Wait Disable field contains the special dialing characters that cause call waiting to
be disabled during a telephone call. Common choices include:
z
*70
z
70#
z
1170
z
Other allows you to enter any other call waiting disable character set.
This prevents the call from being interrupted by the call waiting tone. You should refer to
your telephone service provider to determine the proper call wait disable setting for you.
These characters are dialed first when placing a call.
Access Number
The Access Number field contains the special dialing characters that obtain an outside line.
Leave this field blank if you do not need an outside line or if you never dial a special
number to obtain an outside line.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
