Matrix DFE-Gold Series Modules Hardware Installation Guide
4-3
Table 4
‐
1
describes
the
LED
indications
and
provides
recommended
actions
as
appropriate.
Note:
The terms
flashing
,
blinking
,
solid
and
alternating
used in
Table 4-1
indicate the
following:
Flashing
indicates
an LED is flashing randomly.
Blinking
indicates
an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid
indicates
a steady LED light. No pulsing.
Alternating
indicates an LED is flashing in a steady rate other than 50% on, 50% off.
Table 4-1 LANVIEW LEDs
LED
Color
State
Recommended Action
MGMT
None
Off
. This module is NOT the
Management Module.
None.
Green
Solid
. This module is the
designated Management
Module.
None.
Amber
Flashing
.
This is a
temporary
indication that the
module is saving data.
None.
CPU
None
Power off.
Ensure chassis has adequate power.
Amber
Blinking
. Module in process
of booting.
None.
Solid
. Testing.
If the LED remains amber for several
minutes, contact Enterasys-Networks
for technical support.
Green
Blinking
.
Image starts
running.
None.
Solid
. Functional.
None.
Red
Solid
. Processor in reset.
None.
Green
and
Amber
Blinking
.
Indicates that the
module is in the process of
shutting down.
None. This state is activated when the
OFFLINE/RESET switch is pressed for
less than 1 second to start the process
of an orderly shutdown.
While in this state, do not remove any
DFE-Gold module.
Summary of Contents for Matrix DFE-Gold 4G4202-60
Page 2: ......
Page 16: ...xiv ...
Page 54: ...3 26 Installation ...
