1-5
Power Supply and Connector Specifications (World)
The RoamAbout R1 power and connector specifications are listed in
Table 1-5
. These
specifications are provided for customers who want to provide their own site operating
power for the RoamAbout R1.
Enterasys assumes no responsibility if the specifications set forth below are not followed.
Table 1-5:
RoamAbout R1 Power Supply Specifications (World)
Vibration
10 Hz to 150 Hz, 20 sweeps/axis @ 0.5G, and 5
Hz to 50 Hz up to 5G
Non-operating
Environment:
Packaged Drop
38 inches from floor
Shock -
Transportation
(Packaged)
4,000 bumps @ 10G
You must use the power supply included with this product. Power supply
outputs and current ratings should not exceed the stated minimum voltages
and should not fall below the stated minimum voltages.
Parameter
Value
Power Connector
Coaxial Type Power Plug that mates with
Switchcraft RAPC712 Jack (Switchcraft 760 or
equivalent).
Dimensions:
•
Inside Diameter: 2.5 mm. (0.100 inches)
•
Outside Diameter: 5.5 mm. (0.218 inches)
•
Barrel Length: 9.5 mm. (0.375 inches)
Power Consumption
10 Watts max. @100 to 240 VAC
Voltage Input
•
5V DC (2.0A)
•
Polarity Independent
Heat Dissipation
34.1 BTU/hr. max. @ 100 to 240 VAC
Parameter
Description
