18
VH-2402-L3 Management Guide
9033691-01
The
IP Setup
screen allows you to change the settings for
the Ethernet interface used for in-band communication.
The fields listed under the
Current Switch IP Settings
heading are those that are currently being used by the
switch. Those fields listed under the Restart Settings
heading are those which will be used after the
APPLY
button
is selected.
To set the switch’s IP address:
Highlight
IP Setup
from the main menu and press
Enter.
Figure 1-14. IP Setup Menu
The switch’s factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
To manually assign the switch’s IP address, subnet
mask, and default gateway address:
Highlight the
IP Address:[10.90.90.90]
field and enter the
appropriate IP address.
Highlight the
Subnet Mask:[255.0.0.0]
field and enter the
appropriate subnet mask.
If you want to access the switch from a different subnet from
the one it is installed on, highlight the
Default
