background image

v

4.

EXPORT RESTRICTIONS.

You understand that Enterasys and its Affiliates are subject to regulation by agencies of the 

U.S. Government, including the U.S. Department of Commerce, which prohibit export or diversion of certain technical products 
to certain countries, unless a license to export the product is obtained from the U.S. Government or an exception from obtaining 
such license may be relied upon by the exporting party.

If the Program is exported from the United States pursuant to the License Exception CIV under the U.S. Export 

Administration Regulations, You agree that You are a civil end user of the Program and agree that You will use the Program for 
civil end uses only and not for military purposes.

If the Program is exported from the United States pursuant to the License Exception TSR under the U.S. Export 

Administration Regulations, in addition to the restriction on transfer set forth in Section 1 or 2 of this Agreement, You agree not 
to (i) reexport or release the Program, the source code for the Program or technology to a national of a country in Country 
Groups D:1 or E:2 (Albania, Armenia, Azerbaijan, Belarus, Cambodia, Cuba, Georgia, Iraq, Kazakhstan, Laos, Libya, Macau, 
Moldova, Mongolia, North Korea, the People’s Republic of China, Russia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, 
Vietnam, or such other countries as may be designated by the United States Government), (ii) export to Country Groups D:1 or 
E:2 (as defined herein) the direct product of the Program or the technology, if such foreign produced direct product is subject to 
national security controls as identified on the U.S. Commerce Control List, or (iii) if the direct product of the technology is a 
complete plant or any major component of a plant, export to Country Groups D:1 or E:2 the direct product of the plant or a 
major component thereof, if such foreign produced direct product is subject to national security controls as identified on the 
U.S. Commerce Control List or is subject to State Department controls under the U.S. Munitions List.

5.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS.

The enclosed Program (i) was developed solely at private 

expense; (ii) contains “restricted computer software” submitted with restricted rights in accordance with section 52.227-19 (a) 
through (d) of the Commercial Computer Software-Restricted Rights Clause and its successors, and (iii) in all respects is 
proprietary data belonging to Enterasys and/or its suppliers. For Department of Defense units, the Program is considered 
commercial computer software in accordance with DFARS section 227.7202-3 and its successors, and use, duplication, or 
disclosure by the U.S. Government is subject to restrictions set forth herein.

6.

DISCLAIMER OF WARRANTY.

EXCEPT FOR THOSE WARRANTIES EXPRESSLY PROVIDED TO YOU IN WRITING 

BY ENTERASYS, ENTERASYS DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT 
LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR 
PURPOSE, TITLE AND NON-INFRINGEMENT WITH RESPECT TO THE PROGRAM. IF IMPLIED WARRANTIES MAY NOT 
BE DISCLAIMED BY APPLICABLE LAW, THEN ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THIRTY 
(30) DAYS AFTER DELIVERY OF THE PROGRAM TO YOU.

7.

LIMITATION OF LIABILITY.

IN NO EVENT SHALL ENTERASYS OR ITS SUPPLIERS BE LIABLE FOR ANY 

DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS, PROFITS, 
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR 
RELIANCE DAMAGES, OR OTHER LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM, EVEN IF 
ENTERASYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS FOREGOING LIMITATION SHALL 
APPLY REGARDLESS OF THE CAUSE OF ACTION UNDER WHICH DAMAGES ARE SOUGHT.

THE CUMULATIVE LIABILITY OF ENTERASYS TO YOU FOR ALL CLAIMS RELATING TO THE PROGRAM, IN 

CONTRACT, TORT OR OTHERWISE, SHALL NOT EXCEED THE TOTAL AMOUNT OF FEES PAID TO ENTERASYS BY 
YOU FOR THE RIGHTS GRANTED HEREIN.

8.

AUDIT RIGHTS.

You hereby acknowledge that the intellectual property rights associated with the Program are of critical 

value to Enterasys, and, accordingly, You hereby agree to maintain complete books, records and accounts showing (i) license 
fees due and paid, and (ii) the use, copying and deployment of the Program. You also grant to Enterasys and its authorized 
representatives, upon reasonable notice, the right to audit and examine during Your normal business hours, Your books, records, 
accounts and hardware devices upon which the Program may be deployed to verify compliance with this Agreement, including 
the verification of the license fees due and paid Enterasys and the use, copying and deployment of the Program. Enterasys’ right 
of examination shall be exercised reasonably, in good faith and in a manner calculated to not unreasonably interfere with Your 
business. In the event such audit discovers non-compliance with this Agreement, including copies of the Program made, used 
or deployed in breach of this Agreement, You shall promptly pay to Enterasys the appropriate license fees. Enterasys reserves 
the right, to be exercised in its sole discretion and without prior notice, to terminate this license, effective immediately, for failure 
to comply with this Agreement. Upon any such termination, You shall immediately cease all use of the Program and shall return 
to Enterasys the Program and all copies of the Program.

9.

OWNERSHIP.

This is a license agreement and not an agreement for sale. You acknowledge and agree that the Program 

constitutes trade secrets and/or copyrighted material of Enterasys and/or its suppliers. You agree to implement reasonable 
security measures to protect such trade secrets and copyrighted material. All right, title and interest in and to the Program shall 
remain with Enterasys and/or its suppliers. All rights not specifically granted to You shall be reserved to Enterasys.

Draft

Summary of Contents for WS-AP3705i





































Reviews: