Geographical location, which device will be used in, can be set in this
menu.
For related settings, please refer to
Table-1
.
If some missing or inaccurate data is entered, wrong sunrise and sunset
times are calculated.
Time zone ( ), latitude ( ) and longitude ( ) submenus
exist in this menu.
2 ) SWITCH ON & OFF NUMBER of RELAYS ( ) :
In this menu, switch on&off numbers are displayed for C1 relay. Device
counts once for switching on and once for switching off.
Count number of C1 can be reset
by selecting DELETE option.
DISPLAYS :
Settings, which are done in the 'menus' section, can be observed in this
section. It is not possible to set any parameter in this section.
On the main menu, dashes, which exist near the
numbers between '00-24', represent total working
time of C1 relay.
Displays can be observed by pressing ESC button.
4 ) REAL TIME SETTING ( ) :
Real time and date settings are done in this menu. Year, month, day, hour
and minute can be set respectively.
5 ) GEOGRAPHICAL LOCATION SETTING ( ) :
3 ) LOCK (MANUAL CONTROL) MODE ( ) :
Time difference (UTC/GMT) according to the Greenwich, London
is set. This value is '02' for Turkey. Negative time differences
must be subtracted from '24'. For example, time difference for
Mexico City is '-6' hours and so value must be set as
'18'. (24-6=18)
A lock sign ( ) displays near the relay which is locked.
6 ) SUMMER / WINTER TIME SETTING ( ) :
In this menu, summer/winter time settings are done.
6.1)
If Auto ( ) menu is selected, last sunday of March 02.00 AM
and last Sunday of October 03.00 AM are loaded. For Turkey and Europe,
automic mode is in use.
6.2)
Date and hour also can be set by user manually via manual
( ) menu.
First, month, day, hour and minute is set for summer tariff ( ) and then
same settings are done for winter tariff ( ).
2
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Latitude value is set in this menu. North ( )/South ( ) hemisphere
is selected and related degree value is set.
(For example, Istanbul, North ( ) 41°.
This display represents working time (cronogram) of
C1 relay and also working time internal which relay
will operate. As this example, C1 relay will switch on
for 4 hours between 18:00-22:00.
00
02
04
06
08
10
12
14
16
22
20
18
24
To prevent the operation of the program assigned the
lock menu is placed.
C2:
C1:
9 ) SERVICE MODE ( ):
Lets the user control and maintain in urgent situations. In order to choose
service mode, lock mode shouldnt be selected before. In the main menu,
up and down buttons ( ) should be pressed
at the same time.
When
this mode is selected, assigned programs can not change the relay
position. and lock signs ( ) are displayed. In order to exit the
service mode, up and down buttons should be pressed at the same time.
Date information will be displayed instead of . Lock sign will be
removed. In case of escaping the service mode, the last program
continues its execution. For user safety, it is not possible to enter to lock
( ) and factory settings ( ) modes, when service mode is
activated.
Regarding to assign programs, dashs which are next to the numbers of
00 - 24, represent for switch on and switch off time of the relay. Each
dash represents two hours.
Longitude value is set in this menu. If the longitude is east,
degree value is set directly. If the longitude is west, degree value
is subtracted from 360° and then entered. (For example, Istanbul,
East (e) 29°). For instance, longitude value is 99° west for Mexico
City and so longitude value must be set as '261'. (360-99=261)
Values which are mentioned in
Table-1
are calculated before. Therefore,
there is no need to calculate these values again.
Below diagrams show that how devices can be locked.
When LOCK mode is disabled, device continues to work by
the last program.
C2:
C1:
Below diagrams show that how LOCK menu can be disabled.
This display represents the sunrise time which is calculated
according to coordinate, season and real time settings. According
to this example, sunrise time is 05:30 AM
This display represents the sunset time which is calculated
according to coordinate, season and real time settings.
According to this example, sunset time is 18:38 PM.
If switch on time is set 19:01 instead of 18:00, 18-
20 interval does not have any dashes and also
working time becomes 02:59 instead of 04:00.
24
00
02
04
06
08
10
12
14
16
22
20
18
ASTRONOMIC RELAY
(DTR-10t)
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC
SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC
SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC
SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC
SET
It is shown on time of relay if the real time clock has passed 18:00.
1.6) Day selection ( / , .......... , / ) :
As last, working days for selected programs are set. This setting can be
done for all days starting from Monday.
If YES selected, program function is enabled for related day.
If NO selected, program function is disabled for related day.
As above example, program function is enabled for Monday, Wednesday
and Friday.
7 ) FACTORY SETTING ( ) :
In this menu, all settings are reset except hour and date. By selecting
option, all programs are reset, counters are reset, relays, which are
switched on, are switched off, lock mode is disabled. Coordinates are
programmed according to Istanbul, season is set as auto and LCD contrast
value is set as '13'.
6.3)
If summer/winter time application does not exist in the related
region, option must be selected.
SET
SET
SET
SET
ESC
SET
SET
SET
SET
SET
SET
ESC
SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
SET
SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
C2:
C1:
C2:
C1:
C2:
C1:
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
C2:
C1:
C2:
C1:
C2:
C1:
C2:
C1:
The programming of geographical zone for London is mentioned above.
SET
SET
SET
ESC
SET
SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
SET
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
SET
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
8 ) LCD CONTRAST SETTING ( ) :
LCD contrast value can be set between '0-15' by user.
SET
SET
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
