PLATO Complete Guide V1.1.1
Entotem Ltd.
30
6.3.
Phono controls
There are additional settings that only apply to turntable input devices which must be
connected to the ‘AUX/Phono’ inputs.
Check with your turntable manufacturer’s details for appropriate setting for:
6.3.1.
MM/MC Select
Choose MM for moving magnet or MC for moving coil cartridges.
6.3.2.
Input Resistance
Input resistance is fixed at 47kR for MM sources, but selectable as 100R/200R for MC
sources.
6.3.3.
Input Capacitance
Selectable as 100pf/200pF for MM and MC sources.
6.3.4.
Rumble Filter
Applies a 14Hz cutoff frequency filter to reduce cone flap caused by warped records. Tip:
Disabling this filter may cause problems with silence detection during recording of this input
source.
6.4.
Record Controls
The record controls provide some control over the digital recording for this input source.
6.4.1.
Record default setting
Set to Enabled to activate recording whenever this source is selected. Leaving this set to
Disabled means recording must be started using the media controls on the Now Playing
screen.