28
Connect your enTourage eDGe to a Wired Local Area Network
You can use the USB port to connect to a wired LAN using a USB-to-Ethernet adaptor.
See the acceptable USB-to-Ethernet adaptors on the accessories page.
1. Check your network configuration settings or contact your network administrator for details on adding a device
to your LAN network.
2. Plug the USB-to-Ethernet adaptor in to the USB port on the enTourage eDGe.
3. Connect to the local area network using the Ethernet adaptor.
If you need to use a static IP:
1. Go to the home screen and open the applications menu.
2. Select Settings.
3. On the
Settings
menu, choose
Network controls
.
4. On the Network controls menu, choose
Ethernet settings
.
5. On the Ethernet settings, select the checkbox next to Use static IP. Enter the values for the IP address, Net-
mask, Gateway, and DNS1 and DNS2. See your network administrator for these values if you do not know them.
Return to Contents
Summary of Contents for eDGe
Page 1: ...1 ...