background image

Range Owner’s Manual Rev 20180525                4          For Warranty Service Call (704) 900 2068 

 

WARNING 

  Any self-modification, wrong installation, adjustment or maintenance can lead to property loss 

or casualty. Please contact the manufacturer for any adjustment or maintenance, and have the 
work done by a trained & qualified person. 

  For your safety sake, please keep the machine away from any liquid, gas or other object which 

is flammable or explosive. 

  This appliance should not be operated by those who have physiological, perceptual or mental 

disabilities or those who have insufficient experience or knowledge (including children). Only in 
conditions of being given sufficient supervision& guarantee of personal safety, as well as 
proper instructions & guidance, those who were mentioned above can make some particular 
operation of this device. 

  Keep children away from the device. 

  Preserve this manual safely. When passing on/selling the device to a third party, the manuals 

must be handed over along with the device. All users must operate the device complying with 
the user’s manual and related safety guidelines. 

  If the appliance is placed near walls, partitions or kitchen furniture and the like, it is advisable 

to make these facilities with non-combustible material, otherwise cover them with non-
combustible heat-resistant material, and pay attention to fire prevention regulations. 

  The appliance should be installed in a well-ventilated area with exhausting facilities, which may 

ensure that all burnt gases produced during combustion process are completely exhausted. 

  The appliance is only applicable to low-pressure gas regulating valve. It may lead to loss and 

casualty if other regulating valves are used. 

  Do not seal the screw on the gas valve with seal welding. 

 

Fire warning:

 If you smell the gas, please keep away from fire. Do not light up any device or 

touch the electronic switch. Do not use any phone in the building either. Close the main gas 
valve immediately and call the professional personnel to maintain it. Operation or improperly 
maintained will lead to large gas leakage or deflagration easily. The manufacturer will not bear 
any responsibility for fire accidents caused by improper operation or maintenance. 

 

CODES AND STANDARDS 

This item must be installed in accordance with: 
In the United States: State and local codes, or in the absence of local codes, with: 
National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition).  
NFPA Standard #96 Vapor Removal from Cooking Equipment 
In the commonwealth of Massachusetts all gas appliances vented through a ventilation hood or 
exhaust system with a damper or with a power means of exhaust shall comply with 248 CMR. 
In Canada: Local codes 
CAN/CSA-B149.1 Natural Gas Installation (latest edition). 
CAN/CSA-B149.2 Propane Installation Code  
The installer of this unit should be aware of state, county or local code for connecting this equipment 
to determine if an additional external regulator is required. 

WARNING 

FIRE, INJURY or DEATH HAZARD 

This equipment must be installed by a qualified installer in accordance with all federal, state and 
local codes. Failure to install this equipment properly can result in injury or death. 

 

Summary of Contents for R10-G24-N





















Reviews: