37
IP2253EN - 2017-01-10
For any problems and/or information, contact the Technical Service.
Manual release instructions
In the event of a fault or a power failure, open the window (8), insert the key in the relative lock and
turn it clockwise (as indicated by the arrow).
Release the electric lock (if present). Manually open the gate.
To lock the gate wings again, turn the key anti-clockwise.
WARNING: Only lock and release the door wings when the motor is switched off.
All the rights concerning this material are the exclusive property of Entrematic Group AB.
Although the contents of this publication have been drawn up with the greatest care, Entrematic Group AB
cannot be held responsible in any way for damage caused by any possible mistakes or omissions. We reserve
the right to make changes without prior notice.
Copying, scanning or changing in any way is expressly forbidden unless authorised in writing by Entrematic
Group AB.
8
they are supervised.
To ensure that the system works efficiently and correctly, the manufactur-
er’s indications must be complied with and only qualified personnel must
perform routine maintenance on the motorised door or gate. In particular,
regular checks are recommended in order to verify that the safety devices
are operating correctly.
All installation, maintenance and repair work must be documented and
made available to the user.
Only lock and release the door wings when the motor is switched off. Do not
enter within the operating range of the wing.
DET
ACH AND DELIVER T
O THE USER
