Entrematic Ditec QIK80EH, Technical Manual

31

IP2085EN - 2014-09-01

2.  EC Declaration of Conformity

2.1  Machinery Directive

(Directive 2006/42/EC, Annex II-B)

The manufacturer Entrematic Group AB, with headquarters in Lodjursgatan 10, SE-261 44 Land-

skrona, Sweden, declares that the Ditec QIK80EH type motorised barrier complies with the 

essential requisites of the following EC directives:

-   Electromagnetic Compatibility Directive 2004/108/EC

-   Machinery Directive 2006/42/EC

-   Construction Products Directive 89/106/EC

conforms to the following characteristics of the standard EN 13241-1 (Attachment ZA):

-   Factory production control (Conforming)

-   Release of hazardous substances (Conforming)

-   Resistance to wind load (Class 5)

-   Safe opening (Conforming)

-   Mechanical strength and stability (Conforming)

-   Manoeuvring forces (Conforming)

Notified body: Treviso Tecnologia - CERT

Registration number: 1600

Address: Via Pezza Alta, 34  31046 Rustignè di Oderzo (TV)

Landskrona,  12-02-2013     

                                        Marco  Pietro  Zini                                                                                                                                   

        (Entrance Automation President)

Pursuant to Machinery Directive (2006/42/EC) the installer who motorises a door or gate has the 

same obligations as the manufacturer of machinery and as such must:

-  prepare the technical data sheet which must contain the documents indicated in Annex V of the 

Machinery Directive;

  (The technical data sheet must be kept and placed at the disposal of competent national authori-

ties for at least ten years from the date of manufacture of the motorised door);

-  draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Direc-

tive and deliver it to the customer;

-  affix the EC marking on the motorised door or gate, in accordance with point 1.7.3 of Annex I of 

the Machinery Directive;

-  ensure compliance of the motorised door or gate with safety regulations, by installing the neces-

sary safety devices;

-  refer to the installation manual of the EL34 control panel for the operating force adjustments, 

in compliance with EN12453 and EN12445.

made available to the user.

Only lock and release the door wings when the motor is switched off. 

Do not enter within the operating range of the wing.

To dispose of electrical and electronic equipment correctly, users 

must take the product to special "recycling centres" provided by 

the municipal authorities.