background image

15

15

EN

Manual GS-500_EN_2014-01

9. DATE AND TIME

The system comes equipped with internal real-time clock (RTC) that keeps track of the current date and time. Once the system is up and 

running, the user must set the correct date and time, otherwise the system will not operate properly. After shutting down and starting up 

the system, the date and time must be set again. 
By default, in order to avoid manual date and time set up, the automatic date and time synchronization feature  is enabled 

(see 

9.1. Automatic Date and Time Synchronization

). However, some SIM-card providers  may not support this service.   

Set date and time

SMS

SMS text message content:

ssss_yyyy.mm.dd_hr:mn 

Value:

 

ssss

 – 4-digit SMS password; 

yyyy

 – year; 

mm

 – month, range – [01... 12]; 

dd

 – day, 

range – [01... 31]; 

hr

 – hours, range – [00... 23]; 

mn

 – minutes, range – [00... 59]. 

Example:

 1111_2013.03.16_14:33 

Config 

Tool

This operation may be carried out from the PC using the 

GS-Configurator

 software.

WEB

BROWSER

This operation may be remotely carried out from the PC using the web browser.

9.1.  Automatic Date and Time Synchronization

This feature enables the system to set the date and time automatically without the user being involved in this process. The system supports 

the following methods of automatic date and time synchronization that are used automatically on system start-up and periodically (by 

default – every 30 days):

• 

Via GSM network 

– Once enabled, the system automatically sends a date/time request to the GSM operator.  This method is the 

most accurate synchronization method. Some GSM operators might not support it.

• 

By SMS text message 

– Once enabled, the system automatically sends the SMS text message to its own phone number and 

retrieves the date and time from the SMS text message reply, as the included date and time is set by the SMSC (SMS center). This 

method is not as accurate as the synchronization via GSM network, but always effective.

By default, synchronization via GSM network is enabled. To disable/enable automatic date and time synchronization via GSM network, 

please refer to the following configuration methods.

Enable/disable 

synchronization via 

GSM network

Config 

Tool

This operation may be carried out from the PC using the 

GS-Configurator

 software.

WEB

BROWSER

This operation may be remotely carried out from the PC using the web browser.

By default, synchronization by SMS text message  is disabled. To enable/disable automatic date and time synchronization by SMS text 

message, please enter/remove device phone number using one of the following configuration methods.

Enter/remove device 

phone number for 

synchronization by 

SMS text message

Config 

Tool

This operation may be carried out from the PC using the 

GS-Configurator

 software.

WEB

BROWSER

This operation may be remotely carried out from the PC using the web browser.

Summary of Contents for GS-500









































Reviews: