11. OUTPUTS
GS-500 comes equipped with 2 built-in outputs. The outputs are intended for connection and control of the gate automation device by the
following methods:
•
Free of charge phone call from the user or administrator phone number (see
11.2. Output Control by Free of Charge Phone Call).
•
SMS text message from the administrator phone number (see
11.3. Output Control by SMS Text Message).
•
Automatically in accordance with the scheduled weekdays and time (see
11.6. Automatic Output Control
).
The system allows to view the current output state by the following configuration method.
View output state
SMS
SMS text message content:
ssss_STATUS
Value:
ssss
– 4-digit SMS password.
Example:
1111_STATUS
ATTENTION:
Once the scheduler, set up for automatic output control, comes into effect, the user/administrator will NOT be able to
control the output by phone call and SMS text message (see
11.6. Automatic Output Control
).
11.1. Output Names
The output (-s) has a name that can be customized. Typically, the name specifies a device type connected to a determined output, for
example:
Gate
. The name can be used instead of output number when controlling the output by SMS text message.
By default, the output names are: C1 –
Controll1
, C2 –
Controll2
Set output name
SMS
SMS text message content:
ssss_Co:out-name
Value:
ssss
– 4-digit SMS password;
o
– output number, range [
1
– output C1;
2
– output
C2];
out-name
– up to 16 characters output name.
Example:
1111_C1:OFF:00.10.15
Config
Tool
This operation may be carried out from the PC using the
GS-Configurator
software.
WEB
BROWSER
This operation may be remotely carried out from the PC using the web browser.
View output name
SMS
SMS text message content:
ssss_STATUS
Value:
ssss
– 4-digit SMS password.
Example:
1111_STATUS
Config
Tool
This operation may be carried out from the PC using the
GS-Configurator
software.
WEB
BROWSER
This operation may be remotely carried out from the PC using the web browser.
ATTENTION:
Space, colon, semi-colon characters, parameter names and/or values, such as PSW, STATUS, ON, OFF etc. are NOT
allowed in output names.
