background image

37

37

EN

Manual GS-500_EN_2014-01

16. SYSTEM NOTIFICATIONS

In case of a certain event, the system attempts to send an SMS text message to the first preset administrator phone number only. If the 

administrator phone number is unavailable and the system fails to receive the SMS delivery report within 20 seconds, it will attempt to 

send the SMS text message to the next preset administrator phone number. The administrator phone number may be unavailable due to 

the following reasons:

• 

mobile phone was switched off. 

• 

mobile phone was out of GSM signal coverage. 

The system will continue sending the SMS text message to the next preset administrator phone numbers in the priority order until one 

is available. The system sends the SMS text message only once and will not return to the first administrator phone number if the last one 

was unavailable. 

16.1.  SMSC (Short Message Service Center) Phone Number

An SMS center (SMSC) is a GSM network element, which routes SMS text messages to the destination recipient and stores the SMS text 

message if the recipient is unavailable. Typically, the phone number of the SMS center is already stored in the SIM card provided by the GSM 

operator. If the administrator fails to receive replies from the system, the SMS center phone number, provided by the GSM operator, must 

be set manually.

Set SMSC phone 

number

SMS

SMS text message content:

ssttteeellnnuumm

Value: 

ssss

 – 4-digit SMS password; 

ttteeellnnuumm

 – up to 15 digits SMSC phone number.

Example: 

114417031111111

ATTENTION:  

  Before setting the SMSC phone number, please check the credit balance of the system’s SIM card. The system will fail to 

reply if the credit balance is insufficient.

17. GPRS NETWORK SETTINGS

The GPRS network settings are used for device communication with the remote configuration server via GPRS connection. To set the 

GPRS network settings, please refer to the following configuration methods.

Set APN

SMS

SMS text message content:

ssss_SETGPRS:APN:acc-point-name 

Value: 

ssss

 – 4-digit SMS password; 

acc-point-name 

– up to 31 character APN (Access 

Point Name) provided by the GSM operator. 

Example: 

1111_SETGPRS:APN:internet 

Config 

Tool

This operation may be carried out from the PC using the 

GS-Configurator

 software.

WEB

BROWSER

This operation may be remotely carried out from the PC using the web browser.

Set user name

SMS

SMS text message content:

ssss_SETGPRS:USER:usr-name 

Value:

 

ssss

 – 4-digit SMS password; 

usr-name

 – up to 31 character user name provided by 

the GSM operator.

 

Example: 

1111_SETGPRS:USER:mobileusr

 

Config 

Tool

This operation may be carried out from the PC using the 

GS-Configurator

 software.

WEB

BROWSER

This operation may be remotely carried out from the PC using the web browser.

Summary of Contents for GS-500









































Reviews: