or attempted by anyone not having such qualifications.
Compliance with safety regulations depends upon installing and configuring system correctly,
including using the specified wirings. Only professional assemblers who are familiar with
requirements for safety, Photovoltaic system and EMC must install the system. The assembler is
responsible for ensuring that the end system complies with all the relevant laws in the country
where it is to be used. Envertech require using only genuine replacement parts, manufactured
or sold by Envertech for all repair parts replacements.
Compliance with safety regulations depends upon installing and configuring system correctly,
including using the specified wirings. Only professional assemblers who are familiar with
requirements for safety, Photovoltaic system and EMC must install the system. The assembler is
responsible for ensuring that the end system complies with all the relevant laws in the country
where it is to be used. Envertech require using only genuine replacement parts, manufactured
or sold by Envertech for all repair parts replacements.
Read completely through each step in every procedure before starting the procedure; any
exceptions may result in a failure to properly and safely complete the attempted procedure.
Servicing of this product in accordance with this manual should never be undertaken in the
absence of proper tools, test equipment and the most recent revision to this manual, which is
clearly and thoroughly understood.
This chapter contains the safety instructions that you must follow when installing, operating and
servicing the unit. If ignored, physical injury or death may follow, or damage may occur to the unit.
Read the safety instructions before you commence work on the unit. If you are unable to
understand the Dangers, Warnings, Cautions or Instructions, contact the manufacturer or an
authorized service dealer before installing, operating and servicing the unit.
To ensure your personal safety and the proper use of EnverBridge, please carefully read this manual
before installation. If the product is damaged when installation not comply with this manual,
Envertech do not respond for any quality assurance and other risks.
For Envertech EnverBridge Warranty Terms and Conditions, see the appendix of this manual.
3
4
PV
PCS
+
_
Caution, risk of electric shock
CE mark is attached to the solar EnverBridge to verify that
the unit follows the provisions of the European Low Voltage
and EMC Directives
Photovoltaic
DC terminal, indicating the polarity of the connections,
positive, all positive connections shall be made with
Redinsulated wire
DC terminal, indicating the polarity of the connections,
negative, all negative connections with black insulated
wires
Power conversion equipment, hereby is our DC/AC inverter
SERVICE PERSONNEL
A person having appropriate technical training and
experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of
measures to minimize risks to that person or other persons
Qualified personnel
Person adequately advised or supervised by an electrically
skilled person to enable him or her to perceive risks and to
avoid hazards which electricity can create. For the purpose
of the safety information of this manual, a "qualified person"
is someone who is familiar with requirements for safety,
refrigeration system and EMC and is authorized to energize,
ground, and tag equipment, systems, and circuits in
accordance with established safety procedures. The
EnverBridge and endues system may only be commissioned
and operated by qualified personnel.
DVC
Decisive voltage class
Closed Electrical
Operating Area
Room or location for electrical equipment to which access is
restricted to skilled or instructed persons by the opening of
a door or the removal of a barrier by the use of a key or tool
and which is clearly marked by appropriate warning signs
2.3 Technical competence
The procedures described in this manual should be performed by trained and authorized personnel
only. Maintenance should only be undertaken by competent individuals who havea general
knowledge of and experience with devices of this nature. No repairs should ever be undertaken
2.4 Safety Instructions
• Be aware that only qualified personnel should install and /or replace Envertech EnverBridge.
• Perform all electrical installations in accordance with all local electrical codes.
• Comply the rules of correctly use of tools and personal protective equipment (PPE) for insuring
