ENVION EA150
ENVION EA150
CLEANING & MAINTENANCE
Cleaning the Pre-filter
To keep the unit operating at its maximum performance, it is recommended to vacuum
the Pre-filter every 3 months.
1. Remove the front grill by turning it counter-clockwise.
2. Remove the filter by pulling on the white tab on front of filter.
3. To clean the filter, use the brush or crevice attachment with a vacuum cleaner. Run the
attachment along the surface of the front of the filter, the side with the white tab.
4. Once the filter has been cleaned, replace the filter back into the unit in the reverse order.
Cleaning External Surfaces
1. Turn off and unplug unit.
2. Use a washcloth slightly dampened with a little water and dishwashing soap
to wipe the outer case surfaces.
3. Do not allow water to slip into the internal parts as this could damage your unit
and result in electrical shock and injury to you.
4. Allow the unit to thoroughly dry before use.
TROUBLESHOOTING
PROBLEM
REASON
SOLUTION
Unit will
not operate
ON/OFF button not turned
to ON position.
Unit is unplugged.
The inlet grill has not
been installed and locked
into place.
Press the ON/OFF button.
Check to ensure unit is plugged in.
Check to make sure filter is properly
installed and locked into place.
Reduced
airflow
or poor
filtering
The inlet or outlet grill
may be blocked.
3-in-1 True HEPA filter
maybe clogged.
Check to ensure nothing is blocking
the air inlet and air outlet.
Replace with a new 3-in-1 True HEPA filter,
if necessary.
11
10
