JOhNsON CONTROLs
20
FORM ET115.24-NOM5 (908)
dRAIN
The drain should be checked before initial start-up and
at the beginning of each cooling season to assure that
the lines are clear. If it is clogged, steps should be taken
to clear the debris so that condensate will flow easily.
Periodic checks of the drain should be made during the
cooling season to maintain a free flowing condensate.
Should the growth of algae and/or bacteria be a concern,
consult an air conditioning and refrigeration supply
organization familiar with local conditions for chemicals
available to control these agents.
REPLACEMENT PARTs
Factory replacement parts should be used wherever
possible to maintain the unit performance and
operating characteristics and the testing agency listings.
Replacement parts may be purchased through the local
Sales Representative.
Contact the local Sales Representative or the factory
before attempting any unit modifications. Any
modifications not authorized by the factory could result
in personnel injury and damage to the unit and could
void all factory warranties.
20
25
30
40
50
60
40 [18]
51 [23]
59 [27]
69 [31]
91 [41]
111 [50]
45 [20]
56 [25]
65 [30]
80 [36]
103 [47]
123 [56]
119 [54]
138 [63]
155 [70]
181 [82]
220 [100]
257 [117]
1 ROW - DRY
8 [4]
10 [5]
11 [5]
13 [6]
15 [7]
18 [8]
1 ROW - WET
10 [5]
12 [5]
13 [6]
15 [7]
18 [8]
21 [10]
2 ROW - DRY
11 [5]
13 [6]
15 [7]
18 [8]
22 [10]
26 [12]
2 ROW - WET
14 [6]
16 [7]
18 [8]
22 [10]
27 [12]
32 [15]
3 ROW - DRY
14 [6]
17 [8]
19 [9]
24 [11]
29 [13]
34 [15]
3 ROW - WET
17 [8]
21 [10]
24 [11]
30 [14]
36 [16]
42 [19]
4 ROW - DRY
17 [8]
20 [9]
23 [10]
29 [13]
36 [16]
42 [19]
4 ROW - WET
21 [10]
25 [11]
29 [13]
36 [16]
45 [20]
53 [24]
COIL
ROWS
COMPONENT
UNIT SIZE
HLF BASE UNIT
HLP BASE UNIT
HLE BASE UNIT
NOTE: Unit weight data is in pounds [kilograms].
UNIT WEIGHT dATA (lbs.)
When ordering parts, the following information must be
supplied to ensure proper part identification:
1. Complete unit model number
2. Unit hand connection (right or left hand) while
facing the direction of airflow at the inlet
3. Complete part description including any num
-
bers.
On warranty replacements, in addition to the information
previously listed, the project CO # that appears on the
unit nameplate, is required. Contact the factory for
authorization to return any parts such as defective parts
replaced in warranty. All shipments returned to the
factory MUST be marked with a Return Authorization
Number, which is provided by the factory.
All equipment and components sold through the Parts
Department are warranted under the same conditions
as the standard manufacturer’s warranty with the
exception that the warranty period is 12 months unless
the component is furnished as warranty replacement.
Parts furnished as warranty replacements are warranted
for the remaining term of the original unit warranties.
LD13898
