Place the track bar (B) onto the
mounting plate (D) over the
desired location.
Mark the locations of the mounting
slots of the track bar (B) with a
pencil. Remove the track bar (B)
from the mounting plate (D).
Drill 1/2” diameter holes at the
marked locations.
Mount the track (B) onto the ceiling
using one of the two methods
below:
1.
Use toggle bolts (K) and toggle
wings (J) to mount the track (B)
onto the ceiling. Do not tighten
the toggle bolts (K) at this time
and make sure to leave about
1/2” of space between the
ceiling and the track (B).
2.
Insert ceiling anchors (H) into
the ceiling, then mount the
track (B) onto the ceiling using
anchor screws (I). Do not
tighten the anchor screws (I) at
this time and make sure to
leave about 1/2” of space
between the ceiling and the
track (B).
5
INSTALLATION (CONTINUED)
F
B
J
K
I
H
