7
Wiring
1.
Requires a dedicated 30 A circuit breaker to connect
Waveform Corrector to the electrical system.
2.
Wire should be connected straight to the power
source. Avoid sharp bends and refrain from splicing
the wires as this will reduce the effectiveness of
the unit.
3.
Do not twist wires.
NOTE: It is good electrical practice to tighten all of the
bolts in the electrical panel. Electrical leads should be
connected securely to prevent fire or electrical damage.
Maintenance
EP products do NOT require periodic maintenance. The
units have LED lights to provide visual indication of the
unit’s functional status. It is also good practice to inspect
the connections of the power supply wiring to the EP unit
monthly.
Servicing
EP units contain no serviceable parts and require no
adjustments. All EP products are designed to provide many
years of electrical protection without any need for servicing.
If the EP unit does malfunction, have a professional
electrician inspect the wire connections. If the problem
persists, contact your EP sales representative to discuss
obtaining a replacement unit.
WYE INSTALLATION
DELTA INSTALLATION
Line 1
Line 1
Line 2
Line 2
Line 3
Line 3
Neutral
Ground
Ground
Summary of Contents for EP-2000 Series
Page 3: ......
