24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
18 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
RACK MOUNTING
The ADH Sirocco automatic air dehydrator can be mounted in a standard 19”
communications rack at one of four depths utilizing two mounting locations.
Mounting depths available are flush, 2”, 6”, and 8”. Refer to Figures 8 through
17. The side panels of the chassis contain tapped holes (#8-32) to facilitate
installation. The dehydrator should be mounted using chassis slide rails (not
supplied) or on support channels mounted on the inside of the relay rack.
Because the dehydrator seldom requires operator attention, a location in the
lower portion or extreme upper portion of the rack may be considered.
CAUTION
Before and after rack mounting the ADH Sirocco, ensure that the rack is stable.
Mounting of the unit into the rack should be such that a hazardous condition is
not created due to uneven mechanical loading. Verify that adequate air flow and
power supply capacity is available to the unit. Ensure that the maximum
operating temperature of 113°F (45°C) will not be compromised by other
components in the rack. Ensure reliable earthing of the ADH Sirocco.
Figure 8. ADH SIROCCO RACK MOUNT DIMENSIONS.