24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
26 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
2.
If you thought you were in the Edit Cfg function but selected the View Cfg
function by mistake, you will not see any of the lines highlighted on the
change or settings screens. Refer to Figure 19. Similarly, if you wish only
to view the current settings but happen to enter the Edit Cfg routine by
mistake, you can still view the current operational settings while in the Edit
Cfg mode; just don’t change anything.
Figure 19. SAMPLE VIEW AND EDIT SCREENS.
3.
At the bottom of every change screen, as well as the screen leading
directly into or out of it, is a “Can” or Cancel option. Refer to Figure 20.
To cancel or discard a change, scroll down to highlight “Can” at the bottom
of the screen, then select it by pressing the middle of the rocker switch.
The message Edit DONE will appear and the previous screen will display.
Similarly, if you select the Keep option at the bottom of the change screen
itself, but then select the Cancel option at the bottom of the next screen,
the message Edit QUIT will appear and the system pressure Main screen
will display. Either way, you can always cancel any setting made in error
before that change takes effect. Following a cancellation, you may repeat
the change process, as desired.
UNIT
English
LALM 0.15
LLIM 0.30
HLIM 0.50
HLRM 1.50
Hum Sensor
Y
Keep Cancel
The View screens have
no highlight line.
The Edit screens have a
highlight line.
UNIT English
LALM 0.15
LLIM 0.30
HLIM 0.50
HLRM 1.50
Hum Sensor
Y
Hit a key